A314
General Information: POLYURETHANE FOAM, is a multi purpose filling and montage foam. Manufactured from imported raw materials. Its extra formulation cures by moisture 1 to 3 hours.
Application: For fixing doors, windows and similar frames, filling holes, used in insulation of hot and cold water pipes and electrical equipments, fill up the gaps, holes and cracks.
Direction For Use: Shake the can strongly for 30 seconds. Place the adaptor on the valve firmly and turn the can upside down, then press the adaptor trigger to release the foam. Moisturising the surfaces and over the released foam is strongly advised. It shortens curing time and improves adhesion. Fresh foam can be cleaned by ANTIA PU FOAM CLEANER. Cured foam can be cleaned mechanically.
Application: For fixing doors, windows and similar frames, filling holes, used in insulation of hot and cold water pipes and electrical equipments, fill up the gaps, holes and cracks.
Direction For Use: Shake the can strongly for 30 seconds. Place the adaptor on the valve firmly and turn the can upside down, then press the adaptor trigger to release the foam. Moisturising the surfaces and over the released foam is strongly advised. It shortens curing time and improves adhesion. Fresh foam can be cleaned by ANTIA PU FOAM CLEANER. Cured foam can be cleaned mechanically.
Expiry Date: 15 months after production date. Production date is on the can.
Title | Properties |
---|---|
Curing System: | Moisture |
Skin Forming Time: | 8-10 min |
Cutting Time: | 45-60 min |
Ultimate Elongation (%): | 19 |
Tensile Strength: | 3 N/cm² |
Density: | 15-18 kg/m³ |
Thermal Resistance: | -40°C to +100°C |
Yield: | 18 lt |
Closed Cell Content (%): | 60-70 |
Thermal Conductivity: | 25-30 M W/m.K |
Application Temperature: | 0ºC /+35ºC |
Storage Temperature: | 0ºC /+30ºC |